Wastewater services
Effective wastewater management protects public health, local waterways and the environment.
Whether your property is connected to the town sewer network or uses an on-site sewage management system (OSSM), this page explains how wastewater services are managed and what your responsibilities are.
Which applies to you?
Wastewater is collected, treated and monitored to protect public health and waterways.
If your property is not connected to the sewer network, you are responsible for maintaining an approved OSSM.
Our wastewater systems
The Albury City Urban system consists of:
- Two treatment plants (Waterview at Splitters Creek and Kremur Street in West Albury)
- Six major pumping stations
- More than 50 minor pumping stations
- Greater than 550km of sewer mains that vary in diameter from 150mm to 750mm.
Part of the reticulation system also includes 8,250 access manholes and 196 vent pipes.
Sewage generated from the various customers gravitates into the reticulation system and eventually flows to the pump stations which in turn pump to the treatment plants. Depending on where you live, the sewage generated from your property may go through five pump stations before it reaches the treatment plants.
The two treatment plants treat, on average 10.5 ML per day or the equivalent of four Olympic-sized swimming pools (a megalitre is one million litres).
As part of the operations of the wastewater system, we dose an odour neutraliser at seven pump stations throughout the City to control odour. For emergency purposes, particularly electricity blackouts, we have diesel-powered back-up generators. Council also has two mobile pump stations that can be taken and used at any one of the minor pump stations should these stations have a blackout or there is a major pump malfunction.
Kremur Street Treatment Plant
The Kremur Street treatment plant was constructed in 1916 and has been upgraded or modified a number of times, the last being in the late-1980s. It is a Biological Nutrient Removal (BNR) plant with a treatment capacity of 10 ML per day. Disinfection at this plant occurs via the two large maturation ponds which form part of Horseshoe Lagoon (in West Albury). The treated effluent is pumped to Waterview Treatment Plant where it mixes with the treated effluent from the Waterview Treatment Plant.
Waterview Treatment Plant
The Waterview Treatment Plant was constructed in 2000 and is also a BNR plant. It has a treatment capacity of 8 ML per day and incorporates tertiary treatment using sand filtration and disinfection.
Both treatment plants have chemical back-up (using Alum) for phosphorus removal. A by-product of the treatment process is biosolids (sludge).
An approval condition for the construction of the Waterview Treatment Plant was that no treated effluent was to discharge back into the Murray River. Therefore, all the treated effluent produced by both plants become part of a reclaimed water re-use system, and this is discharged to the Wonga Wetlands in the cooler months and timber plantations and irrigated pastures during the warmer months.
This system services the Hume Weir Resort, the Hume Weir Caravan Park, the Hume Dam workshop and the Eraring electricity power station. It was constructed in 1977 and has a capacity of 100 KL/day. It is an activated sludge plant utilising a Pasveer channel. Disinfection is achieved using maturation ponds and the treated effluent is discharged to the Murray River approximately 300 metres downstream of the Hume Dam wall.
The sludge produced as part of the treatment process is collected in a sludge lagoon which is allowed to dry out and the dried sludge is collected and disposed of.
This system services approximately 35 residences surrounding Lara Lakes in Table Top. It was constructed in 1989 and has a capacity of 100 KL/day. Its treatment process uses two facultative lagoons and the treated effluent is irrigated onto 1.5 hectares of adjacent woodlots.
Wastewater monitoring
Monitoring and testing
Wastewater is regularly sampled and tested to ensure treatment systems operate effectively and meet environmental standards.
Regulatory reporting
Council reports wastewater treatment performance to the NSW Environment Protection Authority (EPA) under licence conditions.
On-site Sewage Management Systems (OSSM)
Installing a system
Approval from Council is required for the installation, construction or alteration of a human waste water treatment device or storage facility and the drains connected to it. If you are installing a new system or altering an existing system please complete the form below and obtain an Approval from Council prior to commencing works.
In accordance with the Local Government Act Council maintains a register of On-site Sewage Management Systems installed within Albury City Council. Council's Environmental Health Officers (EHOs) perform regulatory functions which include the monitoring, and inspection of septic systems to ensure the system complies with relevant legislation and do not pose a risk to the health of the community.
Poorly operated and maintained OSMS systems can pose a high level of risk to public health and has the potential to cause extensive damage to the environment. However, owners of a well maintained and efficient system can benefit from a reduced health risk, a longer life span to the system and increased property values.
Existing on-site treatment systems
A conventional septic system in a residential situation, commonly consist of a single tank connected to a series of underground trenches. Conventional systems operate by allowing the influent (in-coming effluent) to settle over time; where the solid particles sink and the fats float to the top of the tank. This allows a layer of clearer liquid to form in between which flows on to the disposal area.
On average, a septic tank requires to be pumped out every five years, this varies due to the size, usage and health of the tank, along with the type of chemicals that are used in the household. It is good practice to periodically monitor the level in your septic tank, check for any leaks or blockages from the tank and disposal area.
Aerated Wastewater Treatment Systems use mechanised aeration and disinfection processes that allow irrigation of effluent on a designated area as safe means of disposal.
The disposal area connected to an AWTS may consist of above ground sprinklers or a sub-surface dripper system. The wastewater can be used to irrigate lawns and shrubs but must not be applied to fruits and vegetables or come in contact with humans or pets. The disposal area must be sign-posted appropriately and fenced or barricaded to exclude the entry of children, vehicles, pets and livestock.
Owners of an AWTS must enter into a service contract with a certified Service Agent to ensure the system is maintained appropriately. Owners must ensure Service Agents forward a copy of the service report to Council. These systems are connected to electricity to operate the pumps and alarm system, therefore it is important to check the system regularly and after a power failure.
A list of accredited servicing agents is available to download below. Please contact agents directly to arrange all servicing arrangements.